2GIG & DSC Powerseries Burglar Alarm Hardware & Equipment - Atlanta, GA
Security Panel - 2GIG EDGE (Light Commercial & Residential)
The 2GIG EDGE™ panel sets a new benchmark in form and function with its sleek design that is thinner and more powerful than ever. Our on the edge processing technology is the difference that enables touchless disarm and the industry- first home security system with built-in face recognition and analytics within the panel itself – so private data stays private for greater peace of mind.
Our cutting-edge enhancements include double the viewing area, higher resolution, two speakers and dual microphones, delivering superb audio quality and 2-way voice communication. With smart home capabilities, the 2GIG EDGE panel is your competitive advantage in selling the evolution of security and automation.
Security Panel - DSC PowerSeries Neo (Large and Small Commercial)
Door & Window Contacts
The Thin Door/Window Contact and Recessed Door/Window Contact are designed for use on doors, windows, and other objects that open and close. It communicates with the control panel using the 345 MHz frequency. When the magnet (which is mounted near the sensor) moves away from or closer to the door contact’s sensor, signals are transmitted to the control panel.
The 2GIG Passive Infrared Motion Detector is a wall-mounted unit with wide-angle motion protection. It communicates with the control panel using the 345 MHz frequency. When set to High (HI) Sensitivity Mode, the PIR has a maximum range of 30 ft deep x 50 ft wide (9.1 m x 15.2 m). The PIR’s pet-immune feature can be set to tolerate animals up 55 lbs.
Glass Break Detector
The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.
Smoke, Heat, Freeze Detector
Carbon Monoxide Sensor
The Wireless Carbon Monoxide Alarm is a 3V battery powered wireless detector intended for use with wireless alarm systems. The detector consists of an electrochemical carbon monoxide sensor assembly coupled to a wireless transmitter. The Wireless Carbon Monoxide Alarm communicates with the Control Panel and can send alarm, tamper and battery condition messages to the system’s receiver.
The 2GIG Outdoor Wireless Contact Sensor expands the reach of security systems to outdoor areas, providing notification when outdoor gates or doors are opened. Able to handle harsh temperature conditions, this sensor is ideal for wide gaps when a typical contact sensor is insufficient.
The first of its kind to market in the security industry, the 2GIG Stove & Grill Guard provides effective awareness of burners that have been left on accidentally, whether after cleaning, cooking, or socializing. The user can also modify the time from once a burner has been turned on to when the notification will be sent. Notifications can be sent either smartphone or security panel alerts. As such, it gives families peace of mind when seniors are using a stove or grill because they are notified immediately of anything left on.
Slim and sleek (2.2” diameter, 0.21” thickness), the Stove & Grill Guard sensor attaches easily to most common stove or grill knobs. The product is water resistant for use both indoors and outdoors. With patent-pending highly sensitive alarm circuit technology, false negatives are minimized. Users will never have to experience the fear associated with leaving a burner on, or accidental knob turning that can lead to fires, gas leaks, and loss of propane.
The Panic Button Remote is a compact, battery powered, wireless panic button that transmits an Emergency signal from any location within radio frequency (RF) range of the control panel. The signal can be transmitted to the control panel, whether the security system is armed or disarmed.
Fire Fighter Sensor
The FireFighter monitors the existing smoke detectors within the home. It is the easiest, most cost effective way to add smoke alarm monitoring to your 2GIG control panel. FireFighter’s unique technology monitors the existing UL smoke detectors within the home. When an alarm is detected a wireless signal is sent to the control panel which in turn contacts the central monitoring station. With interconnected hardwired smoke detectors found in most homes today, only one FireFighter is needed to monitor ALL the smoke detectors within the home.
Flood & Temperature Sensor
The 2GIG-FT1-345 is a fully supervised, tamper protected one-way 345 MHz sensor. It will monitor the ambient temperature and will detect a wet/dry flood condition. The sensor reports wet/dry conditions and temperature to the panel. Once the sensor probe detects the presence of water for three (3) minutes, the integral transmitter will send a wet alarm transmission to the security/control panel. The probe will also send a restore (dry) report when the presence of liquid is no longer detected by the flood probe for three (3) minutes. The sensor is capable of detecting clean or dirty fresh water, salt water, or tap water.
With a refreshed design, the new Image Sensor for 2GIG GC3 panels combines the capabilities of a wireless PIR motion detector and a digital still camera. The Image Sensor, powered by Alarm.com, offers traditional motion detection combined with visual confirmation of why the motion sensor was activated.
Numera Fall Detection
Numera Wearables are designed for seniors aging-in-place. Attractive comfortable design encourages usage at all hours promoting around-the-clock protection. All wearables are durable, shock and water resistant (IPx7) with long lasting battery that is care-free for years.Numera Fall Detector Pendant (with built-in accelerometers and a completely sealed design is leveraging Numera’s proprietary fall detection algorithms and fall assessment capabilities.
Personal Help Button (2GIG-PHB1-345) Pendant-Wristband is ideal for night use with wrist assembly option. Personal Help Button Pendant (2GIG-PHB2-345) has aesthetically-pleasing design and comes with adjustable break-away lanyard.
Gun Motion Detector
Built into a 3-digit combination trigger lock, the 2GIG Gun Motion Detector adds an important safety tool for gun owners by providing a timely notification to the control panel when a gun is moved.
The Gun Motion Detector is part of the new 2GIG Notification Sensors line, enabling more smart security and control than ever before. These easy-to-install solutions add multiple unique touch points to the 2GIG system. With this growing line, dealers can sell and install increasingly personalized systems that improve customer satisfaction and retention.
*You can view even more 2GIG related products and sensors on the 2GIG Product Website.