Nortek Linear IEI Locksets
Single Door to Enterprise Wide Locksets
  • camera header image
  • keypad header image
  • biometric header image

Nortek Linear IEI Electronic Locksets Atlanta

Nortek Access Control Logo

LS-Series Features

Non-volatile eeprom memory allows in-shop programming
One non-handed unit for both indoor and outdoor applications
Wire Raceway provides clean installation and protects wires inside door
Programs the same as all IEI products
Durable alphanumeric Braille keys
Selective Lockout of grouped of users
Passage/Toggle codes allow door to remain unlocked
Service codes allow one-time entry then are deleted automatically
Error Lockout for successive invalid attempts
Two Stage Low Battery Alert assures entry
Propped Door and Forced Door alerts when used with a standard magnetic switch
Request to Exit allows door to be unlocked from a distance
Four standard AA batteries provide up to 150,000 operations.

LS2 & LS2P Series Features

2,000 individual users per lockset
2,000 transactions stored per lockset
Wireless lockset programming and audit trail retrieval with PDA running Palm OS version 3.5 or newer
Managed with HubManager Professional Software version 4 or newer
Unlimited Access Levels including Time Zones and Holidays
10,000 users per system
Unlimited Sites
Import user names

LS2P Specific Features

Read most HID proximity cards and fobs
Users can be Code, Card, Code and Card, Code or Card

Communications

The LS-2 & 2P offer the unique ability to communicate through a Hand Held PDA to Hub Manger Professional Software, Version 4.0 or higher.
• Realize the benefits of a traditional door controller with the ease of Stand Alone Installation
• The luxury of uploading and downloading (via PDA)
• Users
• Access Levels
• Transaction Logs
• Visit this page for a list of compatible PDA devices

Lock Types

Cylindrical

cylindrical iei
This lockset easily retrofits into an ANSI 151.8 prepped door and requires only one additional 1” hole for installation.
• Lock Body: Grade 1 Cylindrical Lockset w/ clutch mechanism
• Latch: 9/16” Throw, Stainless Steel Latch Retractor
• Cylinder: Solid Brass Schlage “C” keyway, 6 pin, with (2) nickel silver keys
• Optional Cylinders: I/C Core Prep Lever to accept OEM cylinders (see configuration guide for details)

Exit

linear exit access lock
Allows the LS Series locksets to be installed in door applications requiring emergency egress exit bar. Easily installs requiring only (2) additional through holes. Exit bar supplied by others.
• Lock Body: Grade 1 Mortise Lock body
• Latch: Stainless Steel Latchbolt with 3/4” projection and deadlocking latch
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin mortise cylinder, with (2) nickel silver keys. 1 1/8” and 2” can be used with optional spacers
• Optional Cylinders: see configuration guide for details
• Requires Exit Device Mounting Kit: see configuration guide for details
• Also compatible with Rim panic devices, surface horizontal rod devices. Contact factory for installation instructions for these applications

LS2P Panic Bar Panic Bar version

Mortise

linear mortise lockset
This lockset retrofits most ANSI 115.1 Mortise prepped doors with the additional of (2) through holes. The LS Series Mortise lockset can be easily installed in a door with an existing mortise lock.
• Lock Body: Grade 1 Mortise Lock body
• Latch: Stainless Steel Latchbolt with 3/4” projection and deadlocking latch
• Handing: Field reversible on Crescent and American handles, Monaco handle must be ordered with right or left handing specified
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin mortise cylinder, with (2) nickel silver keys. 1 1/8” and 2” can be used with optional spacers
• Optional Cylinders: see configuration guide for details

Mortise with Deadbolt

linear mortise with deadbolt
This lockset retrofits most ANSI 115.1 Mortise with Deadbolt prepped doors with the additional of (2) through holes. The LS Series Deadbolt lockset can be easily installed in a door with an existing mortise and deadbolt lock.
• Lock Body: Grade 1 Mortise Lock body with Deadbolt
• Latch: Stainless Steel Deadbolt with 1” projection, latchbolt with 1 3/4” projection and deadlocking latch. Deadbolt may be projected from option 1 3/4” mortise cylinder with cover cam or thumb turn from inside door
• Privacy Setting feature available
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin mortise cylinder, with (2) nickel silver keys. To project deadbolt from outside door requires a 1 3/4” mortise cylinder. 1 1/8” and 2” can be used with optional spacers and a straight cam
• Optional Cylinders: see configuration guide for details

Finishes & Options

crescent lever handleamerican lever handlemonaco lever handle

Ordering Guide

Linear IEI Lockset Chart

Support Documentation:

-Product Specs
-Keypad Programming
-Installation Manual
-Installation Template